Search results
Results From The WOW.Com Content Network
Color calibration. The aim of color calibration is to measure and/or adjust the color response of a device (input or output) to a known state. [1] In International Color Consortium (ICC) terms, this is the basis for an additional color characterization of the device and later profiling. [2] In non-ICC workflows, calibration sometimes refers to ...
Manufacturers of printers or devices that use colour ink jet technology are meant to abide by this standard when testing for, and labeling the estimated yields of their products. The testing focused on sampling yields generated from typical business consumer printing applications. The judgment of total yield was defined by fade, marked by a ...
Paper test. Paper and ink testing Tests for paper and ink interaction. A variety of tests are used to determine ink and paper and paperboard quality, and to measure their interactions. They are necessary to balance print quality, cost, and wear on the press. Some of the important paper and ink tests are listed here:
The CMYK color model (also known as process color, or four color) is a subtractive color model, based on the CMY color model, used in color printing, and is also used to describe the printing process itself. The abbreviation CMYK refers to the four ink plates used: c yan, m agenta, y ellow, and k ey (black).
The Ishihara test is a color vision test for detection of red–green color deficiencies. It was named after its designer, Shinobu Ishihara, a professor at the University of Tokyo, who first published his tests in 1917. [2] The test consists of a number of Ishihara plates, which are a type of pseudoisochromatic plate.
Press proof is a test print of the data directly on a printing press. This can be the press for the production run or a comparable press (using the same print technology) prepared especially for proof purposes. Short runs of 50 or 100 copies can be produced more cost-effectively than with other color proof processes.
The printing press check is a step in the printing process. It takes place after a printing press is set up but before the print run is underway. Herzliya Airport (Israel) Runway location and Traffic Pattern chart (left) was erroneously printed as a result of "black layer" 180° misplacement. The corrected chart is on the right.
SMPTE color bars are a television test pattern used where the NTSC video standard is utilized, including countries in North America. The Society of Motion Picture and Television Engineers (SMPTE) refers to the pattern as Engineering Guideline (EG) 1-1990. [1] Its components are a known standard, and created by test pattern generators.