Ad
related to: wired microphone with cable port and adapter system
Search results
Results From The WOW.Com Content Network
XLR connectors (mid-50s to today) Most commonly used on professional microphones, the common 3-pin XLR connector is a standard for transferring balanced audio among professional audio equipment. The 4-pin XLR is the standard connector for intercom headsets, such as systems made by Clear-Com and Telex. Two pins are used for the mono headphone ...
XLR3 cable connectors female (left) and male. The XLR connector is a type of electrical connector primarily used in professional audio, video, and stage lighting equipment. XLR connectors are cylindrical, with three to seven connector pins, and are often employed for analog balanced audio interconnections, AES3 digital audio, portable intercom, DMX512 lighting control, and for low-voltage ...
Many mono 'computer' mics are fitted with TRS plugs. The tip is for the MIC and the ring is for power (to power an electret-condenser style MIC). There are exceptions to the above: Hosa cables use grey and orange for left and right analogue channels. RadioShack cables sometimes use grey and black for left and right.
Audio headset. A typical call center/office headset. A headset is a combination of headphone and microphone. Headsets connect over a telephone or to a computer, allowing the user to speak and listen while keeping both hands free.
Phone connector (audio) Phone plug mated in a phone socket. The plug's grooved tip is held firmly by the socket's spring tip contact. When not mated, this spring instead connects to the flat switch contact for detecting a plug. TS and TRS plugs of different sizes. A phone connector is a family of cylindrically -shaped electrical connectors ...
The Xbox One Wired Chat Headset (Model 1564) is a single-ear headset with a boom microphone permanently wired to an adapter that plugs into the rectangular expansion port on the bottom edge of the Xbox One controller; it also engages the two round holes flanking the expansion port with plastic alignment prongs for stability.
Phantom power, in the context of professional audio equipment, is DC electric power equally applied to both signal wires in balanced microphone cables, forming a phantom circuit, to operate microphones that contain active electronic circuitry. [ 1] It is best known as a convenient power source for condenser microphones, though many active ...
Balanced audio is a method of interconnecting audio equipment using balanced interfaces. This type of connection is very important in sound recording and production because it allows the use of long cables while reducing susceptibility to external noise caused by electromagnetic interference. The balanced interface guarantees that induced noise ...
Ad
related to: wired microphone with cable port and adapter system