Search results
Results From The WOW.Com Content Network
For instance the same angle of 0.1 mrad will subtend 10 mm at 100 meters, 20 mm at 200 meters, etc., or similarly 0.39 inches at 100 m, 0.78 inches at 200 m, etc. Subtensions in mrad based optics are particularly useful together with target sizes and shooting distances in metric units .
Decimal degrees (DD) is a notation for expressing latitude and longitude geographic coordinates as decimal fractions of a ... 11.1 mm: 10.2 mm: 7.87 mm: 4.35 mm 8 0. ...
[1] The Charrière is measured by the ''outer'' diameter, and is defined as 1 Fr = 1/3 mm, and thus 1 mm = 3 Fr; therefore the diameter of a round catheter in millimetres can be determined by dividing the French size by 3. [2] The French units roughly correspond to the outer circumference of the catheter (see table below).
25.4 μm. A thousandth of an inch is a derived unit of length in a system of units using inches. Equal to 1000 of an inch, a thousandth is commonly called a thou / ˈθaʊ / (used for both singular and plural) or, particularly in North America, a mil (plural mils ). The words are shortened forms of the English and Latin words for "thousand ...
The current version of the SI provides twenty-four metric prefixes that signify decimal powers ranging from 10 −30 to 10 30, the most recent being adopted in 2022. [ 1 ] : 143–144 [ 7 ] [ 8 ] [ 9 ] Most prefixes correspond to integer powers of 1000; the only ones that do not are those for 10, 1/10, 100, and 1/100.
The general relationship between absorbed dose and equivalent dose can be represented as. H = Q ⋅ D. where H is the equivalent dose, D is the absorbed dose, and Q is a dimensionless quality factor. Thus, for any quantity of D measured in Gy, the numerical value for H measured in Sv may be different.
The nanometre ( SI symbol: nm) is a unit of length in the metric system equal to 10−9 metres ( 1 1 000 000 000 m = 0.000 000 001 m ). To help compare different orders of magnitude, this section lists lengths between 10 −9 and 10 −8 m (1 nm and 10 nm). 1 nm – diameter of a carbon nanotube.
By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.