Ad
related to: 3/4 inch to mm ppr wire adapter
Search results
Results From The WOW.Com Content Network
A 3.5 mm phone connector A 3.5 mm 4-conductor TRRS phone connector A 3.5 mm 5-conductor TRRRS phone connector. In the most common arrangement, consistent with the original intention of the design, the male plug is connected to a cable, and the female socket is mounted in a piece of equipment.
SwitchCraft 2501F/2501M. This is the part number for a Swichcraft connector used with high impedance microphones up through about 1980. It was intended for coax style cable up to 0.281 inches (7.1 mm) outside diameter. Attachment is made with a 5/8-27 threaded ring that can be unthreaded over the body of the connector body allowing the female ...
This includes the original 6.35 mm (quarter inch) jack and the more recent 3.5 mm (miniature or 1/8 inch) and 2.5 mm (subminiature) jacks, both mono and stereo versions. There also exists 4.4 mm Pentaconn connectors .
A double DIN 1.6/5.6 bulkhead jack connector, crimp type, for 75 Ω coaxial cable A Type N connector (male), right-angled solder-type for semi-rigid coaxial cable with a diameter of 0.141-inch. 4.1-9.5 connector, standardized as DIN 47231 (in 1974) and IEC 60169-11 (in 1977) 4.3-10 connector, formerly known as DIN 4.3/10, now standardized as ...
British Standard Pipe ( BSP) is a set of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings by mating an external ( male) thread with an internal (female) thread. It has been adopted as standard in plumbing and pipe fitting, except in North America, where NPT and ...
Cables should meet the S/PDIF specification as defined by the international standard IEC 60958-3 for assured performance. The male plug has a center pin that is 1 ⁄ 8 inch (3.175 mm) in diameter, and is surrounded by an outer shell that is 1 ⁄ 3 inch (8.47 mm) in diameter.
R1JFS = 4 cartridges × 57 mm HEAT M307A1 Shell with Point-Initiating Fuze M90. Wooden crate. Volume: 1 cu ft. R1JSA = 4 cartridges × 57 mm TP (Training / Practice) Shell. Wooden crate. Gross Weight: 38 lbs. Volume: 1 cu ft. R1JUA = 4 cartridges × 57 mm Smoke M308A1 Shell (Steel Case) with Point-Detonating Fuze M503A1. Wooden crate.
JIC fittings, defined by the SAE J514 and MIL-DTL-18866 standards, are a type of flare fitting machined with a 37-degree flare seating surface. JIC (Joint Industry Council) fittings are widely used in fuel delivery and fluid power applications, especially where high pressure (up to 10,000 pounds per square inch (690 bar)) is involved.
Ad
related to: 3/4 inch to mm ppr wire adapter