Money A2Z Web Search

Search results

1. Results From The WOW.Com Content Network

2. Check valve - Wikipedia

   en.wikipedia.org/wiki/Check_valve

   A check valve, non-return valve, reflux valve, retention valve, foot valve, or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. [1] Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various ...

3. Water hammer - Wikipedia

   en.wikipedia.org/wiki/Water_hammer

   To keep water hammer low, pipe-sizing charts for some applications recommend flow velocity at or below 1.5 m/s (4.9 ft/s). Fit slowly closing valves. Toilet fill valves are available in a quiet fill type that closes quietly. Non-slam check valves do not rely on fluid flow to close and will do so before the water flow reaches significant velocity.

4. Hydraulic ram - Wikipedia

   en.wikipedia.org/wiki/Hydraulic_ram

   A hydraulic ram pump, ram pump, or hydram is a cyclic water pump powered by hydropower. It takes in water at one "hydraulic head" (pressure) and flow rate, and outputs water at a higher hydraulic head and lower flow rate. The device uses the water hammer effect to develop pressure that allows a portion of the input water that powers the pump to ...

5. Vacuum breaker - Wikipedia

   en.wikipedia.org/wiki/Vacuum_breaker

   Vacuum breakers can be used in sewage applications as an alternative to a water seal. It utilizes a one-way membrane that acts similar to a check valve. The membrane is sensitive enough to open under the weight of four ounces of water but remains closed when no water is present above to minimize evaporation and eliminate sewer gas odors. [4]

6. Ball valve - Wikipedia

   en.wikipedia.org/wiki/Ball_valve

   A ball valve is a flow control device which uses a hollow, perforated, and pivoting ball to control fluid flowing through it. It is open when the hole through the middle of the ball is in line with the flow inlet, and closed when it is pivoted 90 degrees by the valve handle, blocking the flow. [ 1] The handle lies flat in alignment with the ...

7. Baptist well drilling - Wikipedia

   en.wikipedia.org/wiki/Baptist_well_drilling

   The standard drill bit is based on 1.25 inches (3.2 cm) water pipe fittings and unless a larger diameter is required, the borehole is cased with 1.5 inches (3.8 cm) PVC pipe. The main drill tool consists of a length of metal pipe with a bit/valve. Extensions are standard PVC potable water pipes. No temporary casing is used.