Search results
Results From The WOW.Com Content Network
For a taper thread, it is the diameter at the "gauge length" (plus/minus one thread pitch) from the small end of the thread. The taper is 1:16, meaning that for each 16 units of measurement increase in the distance from the end, the diameter increases by 1 unit of measurement.
The taper rate for all NPT threads is 1 inch of diameter in 16 inches of length (3 ⁄ 4 inch per foot or 62.5 millimeters per meter) measured by the change of diameter (of the pipe thread) over distance of thread.
The hand is a non-SI unit of length equal to exactly 4 inches (101.6 mm). It is normally used to measure the height of horses in some English-speaking countries, including Australia, [ 2 ] Canada, Ireland, the United Kingdom, and the United States.
The image sensor of Four Thirds and MFT measures 18 mm × 13.5 mm (22.5 mm diagonal), with an imaging area of 17.3 mm × 13.0 mm (21.63 mm diagonal), comparable to the frame size of 110 film. [4] Its area, ca. 220 mm 2, is approximately 30% less than the APS-C sensors used in other manufacturers' DSLRs; it is around 9 times larger than the 1/2 ...
The Zuni 5-inch Folding-Fin Aircraft Rocket (FFAR), or simply Zuni, is a 5.0 in (127 mm) unguided rocket developed by the Hunter-Douglas Division of Bridgeport Brass Company and deployed by the United States Armed Forces, [1] [2] and the French Air Force. [3] The rocket was developed for both air-to-air and air-to-ground operations.
For example, a 1 ⁄ 4-20 thread has 20 TPI, which means that its pitch is 1 ⁄ 20 inch (0.050 in or 1.27 mm). As the distance from the crest of one thread to the next, pitch can be compared to the wavelength of a wave .
The Four Thirds System is a standard created by Olympus and Eastman Kodak for digital single-lens reflex camera (DSLR) design and development. [ 1] Four Thirds refers to both the size of the image sensor (4/3") as well as the aspect ratio (4:3). The Olympus E-1 was the first Four Thirds DSLR, announced and released in 2003.
Metric ( SI) units. 25.4 mm. A fire hydrant marked as 3-inch. The inch (symbol: in or ″) is a unit of length in the British Imperial and the United States customary systems of measurement. It is equal to 1 36 yard or 1 12 of a foot. Derived from the Roman uncia ("twelfth"), the word inch is also sometimes used to translate ...