Search results
Results From The WOW.Com Content Network
The 37.5 mm length is not derived by a certain scale ratio. While HO scale is a 1:87 scale (3.5 mm to 1 foot), resulting in a 16.5 mm ( 0.65 in) gauge from real life prototype 1,435 mm ( 4 ft 81⁄2 in) standard gauge standard gauge. Conversely, modeling standard gauge in Lego trains would yield a scaling of (37.5:1435 =) 1:38.3.
T scale, using 3 mm gauge track to represent standard gauge railways. 1:450. 0.677 mm. Model railways (T) T scale, using 3 mm gauge track to represent 3 ft 6 in ( 1,067 mm) gauge railways. Hasegawa also produces plastic ship models in this scale. 1:432.
The image sensor format of a digital camera determines the angle of view of a particular lens when used with a particular sensor. Because the image sensors in many digital cameras are smaller than the 24 mm × 36 mm image area of full-frame 35 mm cameras, a lens of a given focal length gives a narrower field of view in such cameras.
G scale or G gauge, also called large scale ( 45 mm or inches), is a track gauge for model railways which is often used for outdoor garden railways because of its size and durability. G scale trains use a fixed track gauge of 45 millimetres (1.75 in) to accommodate a range of rail transport modelling scales between narrow gauge ( ~1:13 ‒ 1:19 ...
Model gauge. 16.5 mm ( 0.65 in) Prototype gauge. Standard gauge. HO or H0 is a rail transport modelling scale using a 1:87 scale (3.5 mm to 1 foot). It is the most popular scale of model railway in the world. [ 1][ 2] The rails are spaced 16.5 millimetres (0.650 in) apart for modelling 1,435 mm ( 4 ft 81⁄2 in) standard gauge tracks and trains ...
Drawing showing the relative sizes of sensors used in most current digital cameras, relative to a 35mm film frame. The image sensor of Four Thirds and MFT measures 18 mm × 13.5 mm (22.5 mm diagonal), with an imaging area of 17.3 mm × 13.0 mm (21.63 mm diagonal), comparable to the frame size of 110 film. [4]
Ridable, outdoor gauge. The gauge is 5 in (127 mm) in Europe, but 4 + 3 ⁄ 4 in (121 mm) in US and Canada. For standard gauge prototypes at 5 inch, the correct scale is 1 1 ⁄ 16 inch per foot or approximately 1:11.3. Alternatively 1.1/8 inch per foot is adopted, only Australia for ease of conversion. allowing a scale of 3/32 inch per full ...
So a 1 / 2 in (12.7 mm) diameter drill will be able to drill a hole 4 + 1 / 2 in (114.3 mm) deep, since it is 9 times the diameter in length. A 1 / 8 in (3.175 mm) diameter drill can drill a hole 1 + 5 / 8 in (41.275 mm) deep, since it is 13 times the diameter in flute length. [3]