Search results
Results From The WOW.Com Content Network
Primer (paint) A water-based primer, used primarily on wood. A primer ( / ˈpraɪmər /) or undercoat is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. [1]
Liquid wood finishes are applied via automated spray guns in an enclosed environment or spray cabin. The material then can enter an oven or be sanded again depending on the manufacturer’s setup. The material can also be recycled through the line to apply another coat of finish or continue in a system that adds successive coats depending on ...
French polish. French polishing is a wood finishing technique that results in a very high gloss surface, with a deep colour and chatoyancy. French polishing consists of applying many thin coats of shellac dissolved in denatured alcohol using a rubbing pad lubricated with one of a variety of oils. The rubbing pad is made of absorbent cotton or ...
Spray can with enamel paint. Enamel paint is paint that air-dries to a hard, usually glossy, finish, used for coating surfaces that are outdoors or otherwise subject to hard wear or variations in temperature; it should not be confused with decorated objects in "painted enamel", where vitreous enamel is applied with brushes and fired in a kiln ...
Phosphate conversion coating. Phosphate conversion coating is a chemical treatment applied to steel parts that creates a thin adhering layer of iron, zinc, or manganese phosphates, to achieve corrosion resistance, lubrication, or as a foundation for subsequent coatings or painting. [ 1][ 2][ 3] It is one of the most common types of conversion ...
Tung oil has been used for hundreds of years in China, where it was used as a preservative for wood ships. The oil penetrates the wood, and then hardens to form an impermeable hydrophobic layer up to 5 mm into the wood. As a preservative it is effective for exterior work above and below ground, but the thin layer makes it less useful in practice.
Danish oil is a hard drying oil, meaning it can polymerize into a solid form when it reacts with oxygen in the atmosphere. It can provide a hard-wearing, often water-resistant satin finish, or serve as a primer on bare wood before applying paint or varnish. It is a "long oil" finish, a mixture of oil and varnish, typically around one-third ...
A finishing oil is a vegetable oil used for wood finishing . These finishes are a historical finish for wood, primarily as means of making it weather or moisture resistant. Finishing oils are easily applied, by wiping with a cloth. They are also simply made, by extraction from plant sources with relatively simple processing.