Search results
Results From The WOW.Com Content Network
Dry lubricant. Dry lubricants or solid lubricants are materials that, despite being in the solid phase, are able to reduce friction between two surfaces sliding against each other without the need for a liquid oil medium. [1] The two main dry lubricants are graphite and molybdenum disulfide. They offer lubrication at temperatures higher than ...
Automotive paint is paint used on automobiles for both protective and decorative purposes. [1] [2] Water-based acrylic polyurethane enamel paint is currently the most widely used paint for reasons including reducing paint's environmental impact . Modern automobile paint is applied in several layers, with a total thickness of around 100 μm (0.1mm).
A water jet cutter, also known as a water jet or waterjet, is an industrial tool capable of cutting a wide variety of materials using an extremely high-pressure jet of water, or a mixture of water and an abrasive substance. The term abrasive jet refers specifically to the use of a mixture of water and an abrasive to cut hard materials such as ...
Powder coating is a type of coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, which is delivered via an evaporating solvent, powder coating is typically applied electrostatically and then cured under heat or with ultraviolet light. The powder may be a thermoplastic or a thermoset polymer.
A superhydrophobic coating is a thin surface layer that repels water. It is made from superhydrophobic (also known as ultrahydrophobic) materials, and typically cause an almost imperceptibly thin layer of air to form on top of a surface. Droplets hitting this kind of coating can fully rebound. [ 1][ 2] Generally speaking, superhydrophobic ...
Spray can with enamel paint. Enamel paint is paint that air-dries to a hard, usually glossy, finish, used for coating surfaces that are outdoors or otherwise subject to hard wear or variations in temperature; it should not be confused with decorated objects in "painted enamel", where vitreous enamel is applied with brushes and fired in a kiln ...
Many of the best use cases big companies talk about—better customer service, code generation, and taking notes in meetings—are nice incremental wins, but not strategic game changers in any sense.
Cutting fluid. Thin-wall milling of aluminum using a water-based cutting fluid on the milling cutter. Cutting fluid is a type of coolant and lubricant designed specifically for metalworking processes, such as machining and stamping. There are various kinds of cutting fluids, which include oils, oil-water emulsions, pastes, gels, aerosols (mists ...