Search results
Results From The WOW.Com Content Network
Automotive paint is paint used on automobiles for both protective and decorative purposes. [1] [2] Water-based acrylic polyurethane enamel paint is currently the most widely used paint for reasons including reducing paint's environmental impact . Modern automobile paint is applied in several layers, with a total thickness of around 100 μm (0.1mm).
Powder coating is a type of coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, which is delivered via an evaporating solvent, powder coating is typically applied electrostatically and then cured under heat or with ultraviolet light. The powder may be a thermoplastic or a thermoset polymer.
Conformal coating is a protective, breathable coating of thin polymeric film applied to printed circuit boards (PCBs). Conformal coatings are typically applied at 25–250 μm [ 1] thick to the electronic circuitry to protect against moisture and other potentially damaging conditions. Coatings can be applied in many ways including brushing ...
After a surface has been abrasion blasted and/or machined a thin layer of molybdenum, nickel-chromium alloys or nickel aluminide can be spayed before the final detonation spray coating to improve the bond strength. This is known as a bond coating. Bond coatings are often used when spray coating materials of ceramic composites are being applied.
Anti-reflective coatings are often used in camera lenses, giving lens elements distinctive colors. Such colors indicate the wavelength of visible light least affected by the antireflective properties of the coating. A variety of colors can be produced whose precise hue depends entirely on the thickness of the coating.
Spray can with enamel paint. Enamel paint is paint that air-dries to a hard, usually glossy, finish, used for coating surfaces that are outdoors or otherwise subject to hard wear or variations in temperature; it should not be confused with decorated objects in "painted enamel", where vitreous enamel is applied with brushes and fired in a kiln.
A Co-alloy valve part from a producing oil well (30 mm diameter), coated on the right side with ta-C, in order to test for added resistance to chemical and abrasive degradation in the working environment. Diamond-like carbon ( DLC) is a class of amorphous carbon material that displays some of the typical properties of diamond.
Electrostatic spray-assisted vapour deposition ( ESAVD) is a technique (developed by a company called IMPT) to deposit both thin and thick layers of a coating onto various substrates. In simple terms chemical precursors are sprayed across an electrostatic field towards a heated substrate, the chemicals undergo a controlled chemical reaction and ...