Search results
Results From The WOW.Com Content Network
The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above) A flex-fuel vehicle will experience about 76% of the fuel mileage MPG when using E85 (85% ethanol) products as compared to 100% gasoline.
In the standard system the conversion is that 1 gallon = 231 cubic inches and 1 inch = 2.54 cm, which makes a gallon = 3785.411784 millilitres exactly. For nutritional labeling on food packages in the US, the teaspoon is defined as exactly 5 ml, giving 1 gallon = 3840 ml exactly. This chart uses the former.
A litre is a cubic decimetre, which is the volume of a cube 10 centimetres × 10 centimetres × 10 centimetres (1 L ≡ 1 dm 3 ≡ 1000 cm 3 ). Hence 1 L ≡ 0.001 m 3 ≡ 1000 cm 3; and 1 m 3 (i.e. a cubic metre, which is the SI unit for volume) is exactly 1000 L. From 1901 to 1964, the litre was defined as the volume of one kilogram of pure ...
the US gallon (US gal), defined as 231 cubic inches (exactly 3.785 411 784 L), [1] which is used in the United States and some Latin American and Caribbean countries; and. the US dry gallon ("usdrygal"), defined as 1⁄8 US bushel (exactly 4.404 883 770 86 L ). There are two pints in a quart and four quarts in a gallon.
1.242 L: 42 US fl oz-1 ⁄ 3 US gallon. Mostly replaced by the 40 US fl oz bottle by the late 1980s. medium pitcher (US) 1.41 L: 48 US fl oz: 3 US pints. The 48 oz pitcher is used with either medium 12 oz beer glasses (4 glasses per pitcher) or large 16 oz beer glasses (3 glasses per pitcher). Yard of Ale (UK) 1.42 L: 48.03 US fl oz: 50 imp. oz ...
Length. For measuring length, the U.S. customary system uses the inch, foot, yard, and mile, which are the only four customary length measurements in everyday use. From 1893, the foot was legally defined as exactly 1200⁄3937 m (approximately 0.304 8006 m ). [13] Since July 1, 1959, the units of length have been defined on the basis of 1 yd ...
Prior to metrication, in the United Kingdom, the standard single measure of spirits in a pub was 1 ⁄ 6 gill (23.7 mL) in England and Northern Ireland, and either 1 ⁄ 5 gill (28.4 mL) or 1 ⁄ 4 gill (35.5 mL) in Scotland. After metrication, this was replaced by measures of either 25 or 35 millilitres (0.176 or 0.246 gi), at the discretion ...
The former Weights and Measures office in Seven Sisters, London (590 Seven Sisters Road). The imperial system of units, imperial system or imperial units (also known as British Imperial [1] or Exchequer Standards of 1826) is the system of units first defined in the British Weights and Measures Act 1824 and continued to be developed through a series of Weights and Measures Acts and amendments.