Search results
Results From The WOW.Com Content Network
Electrolysis of water is using electricity to split water into oxygen ( O. 2) and hydrogen ( H. 2) gas by electrolysis. Hydrogen gas released in this way can be used as hydrogen fuel, but must be kept apart from the oxygen as the mixture would be extremely explosive. Separately pressurised into convenient 'tanks' or 'gas bottles', hydrogen can ...
Nickel electroplating is a process of depositing nickel onto a metal part. Parts to be plated must be clean and free of dirt, corrosion, and defects before plating can begin. [ 3] To clean and protect the part during the plating process, a combination of heat treating, cleaning, masking, pickling, and etching may be used. [ 1]
Electroplating, also known as electrochemical deposition or electrodeposition, is a process for producing a metal coating on a solid substrate through the reduction of cations of that metal by means of a direct electric current. The part to be coated acts as the cathode (negative electrode) of an electrolytic cell; the electrolyte is a solution ...
An anode is an electrode of a polarized electrical device through which conventional current enters the device. This contrasts with a cathode, an electrode of the device through which conventional current leaves the device. A common mnemonic is ACID, for "anode current into device". [ 1] The direction of conventional current (the flow of ...
The diaphragm further avoids the mixing of the produced hydrogen and oxygen at the cathode and anode, [13] [14] respectively. The thickness of asbestos diaphragms ranges from 2 to 5 mm, while Zirfon diaphragms range from 0.2 to 0.5 mm. [11] Typically, Nickel based metals are used as the electrodes for alkaline water electrolysis. [15]
The net cell reaction yields hydrogen and oxygen gases. The reactions for one mole of water are shown below, with oxidation of oxide ions occurring at the anode and reduction of water occurring at the cathode. Anode: 2 O 2− → O 2 + 4 e −. Cathode: H 2 O + 2 e − → H 2 + O 2−. Net Reaction: 2 H 2 O → 2 H 2 + O 2
An ordinary electric shower often but not always has three heat settings: high (5.5 kW), low (2.5 kW), or cold (0 W) to use when a central heater system is available or in hot seasons. Higher power (up to 7.5 KW) and lower power (up to 3.2 KW) versions are also made, as well as versions with 4 heat settings or a variable heat setting.
Galvanic anode. The bright rectangular objects on these ship components are galvanic anodes. A galvanic anode, or sacrificial anode, is the main component of a galvanic cathodic protection system used to protect buried or submerged metal structures from corrosion . They are made from a metal alloy with a more "active" voltage (more negative ...